430 Alamaha Street, Kahului, Hawaii 96732, United States
Call To Book: (808) 740-4400
AFTERCARE and warranty complete instructions - tint Masters
Full Auto Tint Aftercare & What To Expect
Thank you for choosing Tint Masters Maui for your auto window tinting needs! To ensure you get the most out of your window tint, follow these aftercare instructions for a seamless installation and the longest lasting result!
Drying Time for Auto Window Film
It typically takes 2-5 days for our 3M film adhesive solution to evaporate and for the film to settle down onto the glass permanently. During this time, it’s normal for your windows to appear a little hazy, streaky, or bubbly. It will dissolve once fully dry.
Do not roll your windows down for a minimum of 2-5 days. Refrain from touching your windows at all from the inside at all during this time. It is also normal to see temporary residual water streaks on the exterior of your car as it dries out. If this occurs, simply rinse it off with plain water. Do not touch the inside of your windows during the drying process, not even to clean them- just leave them completely alone temporarily to allow proper adhesion. You can wash the exterior of your vehicle immediately. Also, newer vehicles have delicate sensors on the front windshield, which may trigger temporary false reads after your windshield tint install. This is due to the moisture on the glass, and self-corrects after 2-7 days. To speed up the curing process, leave your vehicle out in the sun.
How to Clean Tinted Car Windows
Our window films may be cleaned with mild, non-abrasive, cleaning solutions that are ammonia-free. Our recommended cleaners include 3M Glass Cleaner, Stoner Invisible Glass (Tint Safe) Cleaner, Armor-All Auto Glass Cleaner, and Meguiar’s Perfect Clarity Auto Glass Cleaner. Look for the “tint-safe” label on popular cleaning products before using.
Never use an ammonia-based cleaner such as Windex on your tinted windows. Only use soft, clean microfiber towels to clean your tinted windows. Do not use any sponges, brown/generic paper towels, or newspaper when cleaning your window film as they can cause scratches. Since tint is installed from the inside, you may wash your car immediately after the install. Do not clean the inside of your vehicle, particularly near your windows and door panels during the drying process as it could add debris to your film.
Quality Control & Imperfections
Your satisfaction is our number one priority, and we take every pre-caution within our control to ensure the cleanest possible install. We are the only tint shop on Maui that uses reverse-osmosis triple purified water for all of our installs. We also use top-quality .5 micron filters on all of our sprayers to further minimize the possibility of any contaminants. Additionally, we work in our enclosed, quality-controlled environment during the install to keep dust at an absolute minimum.
Despite all of these measures, due to the nature of window film, weather conditions, various glass imperfections, and other variables out of our control, we cannot completely prevent the possibility of dirt and airborne dust from creating minor imperfections on your installation. Pre-existing scratches, holes, or metal deposits in your glass may also be more noticeable after your windows are tinted. To reduce these imperfections, we highly recommend thoroughly cleaning your vehicle (inside and out) before your window film installation. This helps us provide the highest-quality installation possible. Alternatively, tint your car as soon as you buy it or straight after cleaning it. The newer the car, the fewer imperfections.
Please note that pre-existing silver streaks, also known as “metal rubs” may also become more apparent after your installation. These imperfections occur when metal objects like baby strollers and ladders touch your glass while driving. In addition, you may notice excess light reflecting off your defogger lines (usually found on the rear window). While intensity varies, it is unavoidable because the film is bending to fit around your defoggers.
Are Scratches, Dings, and Seat Belt Chips Covered By the 3M Warranty?
No. Watch out for your seatbelt and other items in your car that could bump your windows and create dings or scratches. Make sure to be careful with your seatbelt buckle when releasing it. Your warranty covers bubbling, peeling, and de-lamination when proper aftercare is adhered to. This includes refraining from rolling your windows down for a minimum of 2-5 days post install. Customer damage, scratches, and metal rubs are not covered by your warranty.
Front Windshield Tinting; Full Disclosure
Tinting your front windshield can help to provide 99% UV protection, heat reduction, glare reduction, enhanced privacy, and other great benefits. However, it is impossible to guarantee a completely perfect, undetectable film install. This is due to several factors including the nature of airborne dust particles, glass type/age/thickness/curvature, and required heat shrinking and stretching of the film. Dust particles can sometimes appear as tiny or pinpoint bubble(s). While we do our best to minimize dust, eliminating it completely is impossible. While the majority of our customers are extremely satisfied, in some cases, these factors can result in visible changes, including but not limited to film visibility, distortion, waviness, dispersion, etc. Please note that after getting your front windshield tinted, it is normal to notice previously existing glass distortion and flaws in greater detail as the film can enhance those imperfections. Tint Masters Maui will not be liable for your selected film choice and shall be installed at your own risk. No refunds will be issued for any reason once work is completed and labor and products are used. You may also be subject to standard removal fees in the event of elected removal. All of our front windshield tinting options meet the legal tinting requirements for the State of Hawaii.
Our 3M Window Films Warranty
We offer the most prestigious window films on the market. Our 3M films include:
· Color-Stable: 2 Yr Warranty
- FX Premium; 2 Yr Warranty
· Ceramic IR: Lifetime Warranty
· Crystalline: Lifetime Warranty
-Front Windshield Ceramic: 3 Yr Warranty
-Front Windshield Crystalline: Lifetime Warranty
-Sunvisors aka Tintstrips: No Warranty
-Tractors, Boats, and Other Non-Auto Installs: No Warranty
-Basic Film and/or Non 3M Film: No Warranty
Our CERAMIC 86% (Clear Ceramic option), and Lintec films will not receive an emailed E-warranty card, but will still be eligible for a valid warranty claim with a copy of your receipt.
Easily save your receipt to activate your warranty. No further action is required. Misplaced receipts may void warranty eligibility.
Enjoy your New Tints!
Mahalo for trusting us with your window film installation! Please keep us in mind for any additional residential, commercial, or auto window tinting in the future. Tag us on Instagram and Facebook @tintmastersmaui - we love to see you enjoying your new tints!
Residential and commercial Tint aftercare & What To expect
Aftercare for 3M Window Films- Residential & Commercial
3M has devoted 30 years to the development and improvement of 3M Window Films so that today you may enjoy the sun without experiencing the full effects of its harmful rays. As with all products containing an adhesive system, drying time is necessary to achieve the proper bond to the window. During this process, some changes and imperfections may be observed. So that you will understand these differences, we would like to note some of them for you. These are normal and should be expected.
Drying time will be approximately 30-60 days depending on the time of year, longer for security or Thinsulate films. These films can take up to 3-6 months to fully dry. Please do not wash your windows during this period. They may look smeary, This is normal due to the mounting soapy solution.
· Any haziness you may see is water under the film. You will see less and less of this as the days-weeks pass. The film may look different next week than it looks today as it dries.
· A milky appearance might be experienced, but it too disappears during the drying period.
· All trapped water bubbles will dry out, but a few small particles or points may be apparent when dry. Remember, we are not working in a dust-free environment at your home or commercial building and it is impossible to eliminate all dust and contaminants airborne and otherwise.
Quality Control & Imperfections
Your satisfaction is our number one priority, and we take every pre-caution within our control to ensure the cleanest possible install. We are the only tint shop on Maui that uses reverse-osmosis triple purified water for all of our installs. We also use top-quality .5 micron filters on all of our sprayers to further minimize the possibility of any contaminants. To improve chances of a dust free install, it is best to allow us to work in an enclosed, quality-controlled environment during the install to keep dust at an absolute minimum.
Despite all of these measures, due to the nature of window film, weather conditions, various glass imperfections, and other variables out of our control, we cannot completely prevent the possibility of dirt and airborne dust from creating minor imperfections on your installation. Pre-existing scratches, holes, or metal deposits in your glass may also be more noticeable after your windows are tinted. To reduce these imperfections, we highly recommend thoroughly cleaning your windows (inside and out) before your window film installation. This helps us provide the highest-quality installation possible. Alternatively, tint your windows right after buying them (or right after you've gotten them cleaned). The newer the windows, the fewer imperfections.
It is also best for you to have all window coverings and drapes removed temporarily prior to the install to prevent dust particles from contaminating the glass.
Please note that pre-existing silver streaks, also known as “metal rubs” may also become more apparent after your installation. These imperfections occur when metal objects like household objects and ladders touch or bump into your glass.
Bubbles and Particles
These points, generally seen from the outside, are very tiny and are inherent in the use of a pressure-sensitive adhesive system. An adhesive of this type is used because it is the only one that will withstand high humidity, rain, and window condensation. You will normally see these particles only if you get quite close to the glass, which is something we ordinarily do not do. They will not affect the film’s performance.
Caulking and Cleaning 3M Window Film
The 1/16- 1/8″ (3 mm) border you may notice is to allow trapped water to escape from your application according to 3M. Please feel free to caulk if needed to hide light gap after film has completely dried for 30+ days. Cleaning should be done using normal household window cleaners or any non-abrasive window cleaning solution and wiping with a soft towel or squeegee. Paper towels or natural sponges should not be used.
NOTE: Sometimes what seems to be a defect in the film is, in fact, an imperfection in the glass. It is quite natural that one should look closely at a new purchase, but at times we observe things that were always there but never noticed. A good rule to follow is to look at the installation from six feet away. This is the manner in which we normally look through a window and the way in which you should observe your 3M™ Sun Control Window Film — looking through it, not at it. Remember, we are not working in a dust-free environment, so small particles of dust may be noticeable up close.
Film Dry-Out Time
During the installation process, we are able to remove as much as 90% of the mounting solution, although a small amount will remain. Trapped installation moisture can cause small water bubbles and/or a slightly cloudy appearance, this is normal and should be expected. Do not attempt to pierce a water bubble during the dry-out period. Water bubbles and a cloudy look will eventually dissipate. Attempting to pierce a water bubble in an effort to drain moisture will damage your film. This damage is not covered by the warranty.
Climate Conditions & Dry-Out Time
Cold and non-sunny weather conditions can lengthen the dry-out time. Warm weather and direct sunlight exposure will accelerate the dry-out time. If slow drying occurs, do not become alarmed. The trapped moisture will dry out completely. Film type selection and climate conditions will determine the dry-out period you experience. Thicker films and less than perfect drying climate will lengthen the dry-out period. Dry-out times can vary from a few days to as much as 3 months. Safety and security films will always have a longer dry-out period due to the increased thickness of the film.
Cleaning Your Window Film
Do not clean the film for 30 days after installation. This will help secure proper curing of the special mounting adhesive to the glass. Most glass cleaners will work well, although a good cleaning solution for window film is 1⁄2 ounce of liquid dish soap added to 1 quart of fresh water. We do not suggest ammonia-based cleaners.
A soft, clean microfiber cloth is recommended for washing the window film, followed by another clean soft cloth or soft rubber squeegee for drying. To avoid scratching the film, do not use bristle brushes, sponges, paper towels, or any cleaning materials that may have been contaminated with dirt particles. Some brands of paper towels are coarse enough to put fine scratches in the film, even films with protective hard coat finish. While these scratches may be too thin to be seen at the beginning, they can damage the polished look of the film over time.
Are Scratches and Chips Covered By the 3M Warranty?
Avoid touching your windows or allowing household objects to bump into them as it can cause scratches and chips. This is not covered in your 3M warranty. Your warranty covers bubbling, peeling, and de-lamination when proper aftercare is adhered to. Customer damage, scratches, and metal rubs are not covered by your warranty, nor can we ever guarantee a 100% contaminant free install.
Our 3M Window Films Warranty
We offer the most prestigious window films on the market. Our 3M films include:
-3M Color-Stable: 10 Yr Warranty (Residential) and FX
-3M Night Vision: Limited Lifetime Residential Warranty, Limited 15 Yr Commercial Warranty
-3M Prestige: Limited Lifetime Residential Warranty, Limited 15 Yr Commercial Warranty
-3M Ultra Prestige: Limited Lifetime Residential Warranty, Limited 15 Yr Commercial Warranty
-3M Security: Limited Lifetime Residential Warranty, Limited 15 Yr Commercial Warranty
-3M Fasara: Limited Lifetime Residential Warranty, Limited 15 Yr Commercial Warranty
*No warranty on non-3M film installs such as reflective/mirrored tint and Non-3M brand Frost*
Easily save your receipt and emailed e-warranty card to activate your warranty. No further action is required. Misplaced receipts and/or warranty cards will void eligibility. Only 3M film installations will receive an emailed e-warranty card.
Enjoy your New Window Film Installation!
Mahalo for trusting us with your window film installation! Please keep us in mind for any additional residential, commercial, or auto window tinting in the future. Tag us on Instagram and Facebook @tintmastersmaui - we love to see you enjoying your new tints!
